3570k manual voltage

 · I have my k at GHz, pos. offset, max vcore is (in CPU-Z) running IBT (82c max temp). I started at GHz, manual vcore, got to by increasing LLC other CPU power settings, stable at but hot, so played with offset voltage until I arrived at + www.doorway.ru Interaction Count:  · Hi guys, Just want abit of advice on 'safe' temps and voltage for the i5 k. I currently run at Ghz idle, with temps of and voltage at Under prime95 I run at Ghz, with temps of between and voltage at If so your VID voltage is probably around ish and the offset for whatever you set it for is adding to that. Try fix voltage and set it to volts at a multiplier 42 plus disable speedspectrum and keep everything else stock and test. You should be able to reach 42 at around +/- to +/-. The max id set a k is around

Core iK (32nm Sandy Bridge) and iK (22nm Ivy Bridge) Biostar TZ77MXE motherboard; The TZ77MXE motherboard allows adjustment of processor frequency (multiplier) and voltage, although it does not allow manual adjustment of voltage below V, or negative voltage offsets. Hi guys, Just want abit of advice on 'safe' temps and voltage for the i5 k. I currently run at Ghz idle, with temps of and voltage at Under prime95 I run at Ghz, with temps of between and voltage at Intel® Extreme Tuning Utility (Intel® XTU) is aimed at intermediate-level users that have some basic knowledge about overclocking and how it works. If you don't, we recommend that you check out our guide to overclocking before proceeding.. For this guide, we will be using an Intel® Core™ iK desktop processor, and our recommendations and results will reflect that.

Hi guys, Just want abit of advice on 'safe' temps and voltage for the i5 k. I currently run at Ghz idle, with temps of and voltage at Under prime95 I run at Ghz, with temps of between and voltage at Remember more voltage = more heat, so you ideally want to find the lowest voltage at which your CPU can run GHz stably. V is a good starting value that should be enough to get any iK to GHz, but this CPU was able to run stably at V. The part where it says V is enough for most k is discouraging as when i try with my k it blue screens at the windows logo. I've got my k overclocked to ghz with LLC on extreme and a voltage of V which I think is a bit much but I guess i've run out of luck but the most annoying part is this - Ive had the lot replaced the motherboard and processor and the last ones were the same as well.